Employment Page

Employment Opportunities

Blender Operator – Reports to Project Superintendent

Performs the manufacture of various types to field blended binder materials including asphalt-rubber binder, rubberized asphalt binder, polymer modified asphalt-rubber binder, rubberized scrub seal binder and polymer modified asphalt binder within the various specification requirements and established safety standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Actual scope of responsibility will often exceed this general outline. Attendance is mandatory.

Responsible for the manufacture of the various binder materials mentioned above.
Continuously monitors blender components, quality and condition of binder material and performs lube and fuel.
Maintain inventory and meet schedule to coincide with chip seal or hot plant operations.
Preparation of specified binder material based on laboratory binder design.
Performs viscosity testing.
Monitor fuel levels and keeps superintendent aware of possible problems.
Collect and turns in time cards for “blender laborers”.
Have a thorough knowledge of all paperwork requirements and office procedures relative to departmental operations.
Responsible, on occasion, for minor equipment maintenance.
Set up and tear down of blending and reaction equipment.
Transport of equipment, calibration and unload/load of materials.
Special projects as assigned.

SUPERVISORY RESPONSIBILITIES include overseeing plant laborers relating to training, safety, inspecting their work, budgeting, coaching and/or counseling.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Three years experience in asphalt-rubber or modified asphalt road surfacing environment.
Must possess the ability to prioritize and handle multiple projects utilizing organizational skills and communication skills.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Blender Laborer – Reports to Blender Operator

Assists blender operator in the manufacture of asphalt-rubber and other binder materials manufactured in the field that may be required by specification on various projects, within established safety standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Actual scope of responsibility will often exceed this general guideline. Attendance is mandatory.

Assist blender operator in the manufacture of asphalt-rubber and other modified binder materials.
Maintain supply of materials for the manufacture of modified binder materials.
Maintain cleanliness of blend site.
Loads and unloads spreader trucks and transport trucks.
Have thorough knowledge of all paperwork requirements.
Assists in set up and tear down of all blending and reaction equipment.
Special projects as assigned.

Entry level position and therefore one to six months previous work experience would be acceptable for this position.
Must possess the ability to prioritize and handle multiple projects and assignments.
Strong sense of responsibility regarding timely and accurate completion of work and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Chip Box Operator – Reports to Project Superintendent

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory.

Responsible for operation and maintenance of chip box.
Responsible for accurate application of aggregate into the properly applied modified asphalt binder as specified on the project.
Ensure daily adjustments and calibrations.
Ensure had tools and tar paper are available on the chip box, daily.
Responsible for pre-trip inspections making sure equipment is clean, lubricant is current, oil leaks are repaired and brake adjustment is done.
Oversee crew to ensure project tasks are completed in a timely manner.
Responsible for cleaning of individual gates concerning hot pre-coated aggregate application and daily gate adjustment check.
Ensure adequate fuel levels in chip box and check tire air pressure level, daily.
Maintain daily log book as required.
Responsible for timely collection and submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as required.

SUPERVISORY RESPONSIBILITIES include overseeing chip box laborer, lead roller operator and distributor truck operator along with performance, inspecting, coaching and/or counseling and enforcing safety on the jobsite.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum of one to three years experience in the road surfacing industry
Must posses a valid commercial driver’s license and may be required to have a Class “A” CDL with Hazmat and tank endorsements.
A solid understanding of construction procedure, construction materials, traffic control requirements, safety requirements and regulations.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Distributor Truck Operator – Reports to Chip Spreader Operator

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. A Class “A” CDL with Hazmat and Tank Endorsements is required. Attendance is mandatory.

Supervision of the boot-man and squeegee-man.
Responsible for accurate binder application rate as per specification.
Ensure spreader maintenance, fluid levels, check form oil leaks including hydraulic, lube and binder. Responsible to assure that equipment is in good operational condition and can perform daily.
Responsible for pre trip inspections making sure screens are clean, nozzle alignment is correct, spreader bar is flushed and continually monitoring application rates throughout each load.
Oversee crew to ensure project tasks are completed in a timely manner.
Ensure adequate fuel levels in spreader truck on a daily basis.
Maintain driver log book as required.
Loading and off loading of asphalt cement and the blended modified binder.
Responsible for timely collection and submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

SUPERVISORY RESPONSIBILITIES include overseeing the boot-man and squeegee-man along with performance, inspecting, coaching and/or counseling and enforcing safety on the job site.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum of one to three years experience in the road surfacing industry.
Must have excellent communication skills both written and verbal to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Boot-man – Reports to Distributor Truck Operator

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory.

Ensure proper operation and maintenance of spreader bar and opacity units.
Assist distributor truck operator when needed.
Manipulation of opacity units.
Assist in daily maintenance of all equipment on the project.
Responsible to pull tabs, pop buttons or other labor duties as required.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Entry level position
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Chip Box Laborer – Reports to Chip Box Operator

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory.

Ensure level spreading of aggregate material from the chip box, knock down joint rock application and spill piles.
Responsible to stock chip box with required hand tools, tar paper and other materials.
Assist chip box operator when needed.
Responsible tools and equipment are in good working condition, daily.
Miscellaneous labor work as required.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum of one to three years in the road surfacing industry.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable in functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Roller Operator – Reports to Lead Roller Operator

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory.

Ensure proper and timely embedment of aggregate into the binder material.
Responsible for roller operations
Responsible for pre-trip inspections making sure roller is clean, lubrication is current and brake adjustment along with tire pressure is maintained.
Load required hand tools, tarpaper and miscellaneous consumables, daily.
Required to make sure equipment is in good condition to perform, adjust chains, check fluids, loading, unloading and transporting equipment.
Ensure adequate fuel level in the roller, daily.
Responsible to roll, labor, pull tabs, pop buttons, rake bumps, ridges and piles of aggregate.
Maintain cleanliness of all company equipment as required.
Responsible for timely submission of time cards and logbooks.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

Entry level position.
Must posses a valid driver’s license.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Broom Operator – Reports to Lead Broom Operator

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory.

Responsible for pre sweep of the pavement surface and sweeping excess aggregate off the roadway, after the chip seal is complete, prior to opening lanes to live traffic.
Responsible for sweeper broom operation and overall condition.
Responsible for pre-operation inspection making sure the broom is clean, lubrication is current, fluid levels are checked, air filters are clean, radiator is clean and brake adjustment is done.
Load required hand tools, tar paper and miscellaneous consumables, daily.
Ensure adequate fuel levels, daily.
Responsible to sweep as required, pop buttons, pull bottom covers, and place tabs.
Maintain proper tire pressure, daily.
Maintain cleanliness of all company equipment as required.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Entry level position.
Must posses a valid driver’s license.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Truck Boss – Reports to Superintendent

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory and other duties may be assigned.

Coordinate and oversee the safe and efficient transportation of materials to and from the final destination or project site.
Supervision and safety of personal at, to and from various job sites.
Critiques the accuracy of documents and monitors completeness.
Responsible for pre-trip inspections, transport of materials and ensures adequate vehicle fluid levels, including fuel on a daily basis.
Responsible for conveying dispatch orders to truck drivers from project manager and/or superintendent.
Interacts and assembles truck drivers daily and dispatches trucks.
Assures compliance with company drug and alcohol policy.
Monitors coating percentage on projects utilizing hot pre-coated aggregate.
Responsible for stockpile cleanliness.
Monitors trucking production and public safety.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

SUPERVISORY RESPONSIBILITIES include but are not limited to those listed below.

Oversees truck drivers and loader operator both internal and external
Responsible for training, performance, inspecting, coaching and/or counseling and enforcing safety on the project site.

Minimum of three years in the road surfacing industry.
Must have excellent communication skills, both verbal and written to interact with internal and external customers.
Proven leadership qualities.
Must possess the ability to prioritize and handle multiple projects simultaneously utilizing organizational skills and communication skills.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Loader Operator – Reports to Truck Boss

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory and other duties may be assigned as required.

Responsible for the loading of aggregate into dump trucks and the clean up of stock pile areas.
Ensure loader fluid levels and fuel levels are full on a daily basis.
Responsible for pre-trip inspections making sure to grease loader, check tire pressure, along with other maintenance issues as required. Needs to check bucket wear and make sure transport equipment is in good working order, daily.
Loading and off loading of equipment.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities tom perform the essential functions.

Minimum of one to three years in the road surfacing industry.
Must posses a valid driver’s license.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Truck Driver – Reports to Truck Boss

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory but other duties may be assigned as required.

Transporting materials in a safe and efficient manner to project sites.
Responsible for pre-trip inspections, making sure the truck is clean, lubrication is current, and brake adjustments are made
Ensure adequate fuel level in truck, daily.
Maintain driver log book as required by law.
Obtain dispatch information, daily.
Responsible for tags.
Responsible for timely submission of time cards.
Have a thorough knowledge of all paperwork requirements.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum of three years in the road surfacing industry.
Must posses a valid driver’s license as it applies to the type of truck assigned to driving.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Pilot Car Driver – Reports to Traffic Control Supervisor

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory and the actual scope of responsibility will often exceed this general guideline.

Responsible for guiding traffic safely through construction zone sites within established safety standards as per the required traffic control plan.
Responsible for placement of “Portable Changeable Message Sign”.
Responsible for pre-trip inspection of pilot vehicle.
Responsible for cleanliness of pilot vehicle and traffic control devices.
Complete time cards accurately and in a timely manner.
Responsible for timely submission of time cards.
Responsible for completion of paperwork as it relates to loops made during shift.
Special projects as assigned.

Entry level position
One to six months of work experience would be acceptable for this position.
Absolute necessity to have a valid driver’s license.
Must posses the ability to prioritize and handle multiple projects at once.
Must have excellent communication skills both verbal and written to interact with internal and external customers.
Must be capable of functioning safely in a fast pace, stressful and demanding working environment, and often long hours.

Flagger – Reports to Traffic Control Supervisor

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory but the actual scope of responsibility will often exceed this general outline.

Responsible for controlling traffic safely through construction zone sites within established safety standards.
Communicate continuously with other flagger’s and pilot car to assure safety of the general public in work zone areas.
Responsible fro fully charged radios for use at project sites.
Responsible for loading and unloading traffic control equipment.
Complete time cards accurately and in a timely manner, daily.
Responsible for timely submission of time cards.
Responsible for maintaining a professional relationship with the general public resulting in ongoing good public relations.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Lifting and carrying items often weighing in excess of 25 pounds during the course of the work day.
Reaching for items frequently during the day, often requiring full length arm’s reach.
Specific vision abilities required for this job include close, distance, color and peripheral vision and ability to adjust focus.
Tactile sensory requirements.
Hand coordination is very important.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Post and Notify – Reports to Traffic Control Supervisor

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory but the actual scope of responsibility will often exceed this general scope.

Responsible to notify the affected public within the projected project limits of proposed work.
Responsible for identifying possible safety hazards within the project limits..
Notify residents/businesses with the proper door hangers.
Responsible for the placing of “No Parking” signs, per specification requirements, on all affected streets.
Keeps the Traffic Control Superintendent informed of possible problems.
Removal of barricades when required.
Responsible for barricade truck, maps and schedule.
Responsible for timely submission of time cards.
Have thorough knowledge of all paperwork requirements relative to the projects operation.
Special projects as assigned.

Minimum one year in the road surfacing industry.
Must have excellent communication skills both verbal and written to interact with internal and external customers and the traveling public.
Must posses the ability to prioritize and handle multiple projects utilizing organizational and communication skills.
Must have a strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working conditions, and often long hours.

Prep Laborer – Reports to Traffic Control Superintendent

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Attendance is mandatory but the actual scope of responsibility will often exceed this general outline.

Prepare roads and streets for the application of binder and aggregate within the specification requirements and established safety standards.
Responsible for traffic control devices and protection devices.
Protect existing utility covers and monuments.
Responsible for ensuring drain inlets are protected and kept fully functional and operational.
Assists in preparation and clean-up and makes sure streets are clear of “green waste” and parked cars.
Maintain Cleanliness of project site.
Have thorough knowledge of all paperwork requirements.
Responsible for timely submission of time cards.
Loading and unloading of supplies for traffic control.
Clean vehicles and transport CMS.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Entry level position
A one to six months previous work experience would be acceptable for this position.
Must posses the ability to prioritize and handle multiple projects.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working conditions, and often long hours.

Transport Driver – Reports to Central Dispatch

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. A Class “A” CDL with Hazmat and Tank Endorsements is required. Attendance is mandatory.

Operates gasoline or diesel powered tractor-trailer combination to transport and deliver products or materials in liquid form to individual project sites.
Understands and has executed company policy regarding customer focus, environmental compliance and public relations.
Has systematically and consistently followed the general rules of driving as outlined in the “Drivers Manual”.
Consistently follows attitude, conduct, customer service, equipment problems, job knowledge, safety procedures and paperwork requirements.
Completes Pre/Post and roadside vehicle inspections routinely without reminder.
Maintains vehicle in compliance with Driver Manual.
Demonstrates total competency involving loading and unloading procedures, emulsion handling, asphalt cement handling and pumping procedures.
Have thorough knowledge of all paperwork requirements.
Responsible for timely submission of time cards and maint. of driver log book.
Assures compliance with established company drug and alcohol policies.
Under no circumstances will drivers smoke while loading or unloading asphalt products or where flammable vapors are present.
The professional Drivers failure to promptly notify his/her dispatcher or other designated individuals while at the scene of an accident, injury or incident will result in disciplinary action up to and including termination. Never leave the scene without notifying dispatch!
Drive with headlights on at all times.
Driver must have a thorough and complete understanding of all the rules and regulations as outlined in the driver’s manual distributed at the time of hire.
Special projects as assigned.

OPERATION the following are to be in your possession at all times.

Valid commercial drivers license (CDL) with Hazmat and Tank Endorsements.
Valid DOT medical examiners certificate. ● Accident Kit ●Drivers Manual

QUALIFICATIONS to perform this job successfully, a person must be able to perform each individual duty. The requirements listed above and below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Works alone and with others well, often requiring shift work.
Works well in varied weather and job conditions (dirt, dust, heat, cold, humidity)
Must be capable of functioning safely under a fast pace, stressful and demanding working conditions, and often long hours.

Heavy Equipment Transport Driver – Reports to Central Dispatch

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. A Class “A” CDL with Hazmat and Tank Endorsements may be required. Attendance is mandatory.

Drives gasoline or diesel powered tractor-trailer combination to transport and deliver products/equipment and/or materials in liquid form to individual projects.
Understands and has executed company policy regarding customer focus, environmental compliance and public relations.
Has systematically and consistently followed the general rules of driving as outlined in the “Drivers Manual”.
Consistently follows procedures concerning attitude, conduct, customer service, equipment problems, job knowledge, safety and paperwork.
Completes Pre/Post and roadside vehicle inspections routinely without reminder.
Maintains vehicle in compliance with Driver Manual to minimize abuse and costs.
Demonstrates total competency involving loading and unloading procedures.
Have thorough knowledge of paperwork requirements.
Responsible for timely submission of time cards.
Maintain driver log book as required.
Assures compliance with company drug and alcohol policy.
The Professional Driver’s failure to promptly notify his/her dispatcher or other designated individuals while at the scene of an accident, injury or incident will result in disciplinary action up to and including termination. Never leave the scene without notifying dispatch!
Drive with headlights on at all times.
Driver must have a thorough and complete understanding of all the rules and regulations as outlined in the Drivers Manual distributed to them at time of hire.
Special projects as assigned.

OPERATION – the following are to be in your possession at all times.

Valid commercial driver’s license (CDL) with Hazmat and Tank Endorsements.
Valid DOT medical examiners certificate. ● Accident Kit ● Drivers Manual

QUALIFICATIONS to perform this job successfully, a person must be able to perform each individual duty. The requirements listed above and below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Works alone and with others well, often requiring shift work.
Works well in varied weather and job conditions (dirt, dust, heat, cold, humidity)
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.

Transport Driver Trainee – Reports to Central Dispatch

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. These duties will be performed under the guidance and close supervision of a certified transport driver and the Transportation Manager. Other duties may be assigned and attendance is mandatory. A Class “A” CDL with Hazmat and Tank Endorsements may be required.

Drives gasoline or diesel powered tractor-trailer combination to transport and deliver products or materials in liquid form to individual project sites.
Understands and has executed company policy regarding customer focus, environmental compliance and public relations.
Has systematically and consistently followed the general rules of driving as outlined in the “Drivers Manual”.
Consistently follows procedures concerning attitude, conduct, customer service, equipment problems job knowledge safety and paperwork.
Completes Pre/Post and roadside vehicle inspections routinely without reminder.
Maintains vehicle in compliance with Driver Manual to minimize abuse and costs.
Demonstrates total competency involving loading and unloading procedures of hot liquid asphaltic materials.
Have thorough knowledge of all paperwork requirements.
Responsible of timely submission of time cards.
Maintain driver log book as required.
Assures compliance with company drug and alcohol policy.
Under no circumstances will drivers smoke while loading and unloading product delivery equipment where flammable vapors exist. Drivers shall obey all smoking restrictions while on duty.
The Professional Driver’s failure to promptly notify his/her dispatcher or other designated individuals while at the scene of an accident, injury, or incident will result in disciplinary action up to and including termination. Never leave the scene without notifying dispatch!
Drive with headlights on at all times.
Driver must have a thorough and complete understanding of all the rules and regulations as outlined in the Drivers manual distributed to them at time of hire.
Special projects as assigned.

OPERATION – the following are to be in your possession at all times.

Valid commercial driver’s license (CDL) with Hazmat and Tank Endorsements.
Valid DOT medical examiners certificate. ● Accident Kit ● Drivers Manual

QUALIFICATIONS to perform this job successfully, an individual must be able to perform each individual duty. The requirements listed above and below are representative to the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. “SEE TRANSPORT DRIVER FOR BULLETT POINTS”.

Mechanic – Reports to Superintendent or Shop Foreman

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Actual scope of responsibility will often exceed this general outline. Attendance is mandatory.

Perform repairs and maintenance on various types of ISS equipment.
Responsible for troubleshooting and welding as it relates to equipment maintenance.
Responsible for basic electrical and hydraulic maintenance.
Maintains documentation of work performed to assure completeness of equipment maintenance.
Keeps Shop Superintendent/Foreman informed of possible problems.
Maintains field inventories for servicing of equipment.
Monitors Preventative Maintenance Program on all equipment.
Have thorough knowledge and the capacity to process all paperwork requirements and office procedures relative to departmental operations.
Responsible for timely submission of time cards.
On call 24/7 to travel when needed to perform maintenance in the field.
Special projects as assigned.

QUALIFICATIONS to perform this job successfully, a person must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Five to ten years experience in a mechanical repair and maintenance environment.
Must posses the ability to prioritize and handle multiple projects simultaneously utilizing organizational and communication skills.
Strong sense of responsibility regarding timely and accurate completion of work, and a strong commitment to corporate goals.
Must be capable of functioning safely under a fast pace, stressful and demanding working environment, and often long hours.